15.06.2022 • Contributions
inspect award 2022: Vote now and choose the best innovations
The jury of the inspect award 2022 has nominated ten products each in the categories "Vision" and "Automation + Control". Now it's the turn of the readers of WileyIndustryNews to choose the best innovations in machine vision and optical metrology of 2022.
Bild: Wiley
The voting of the inspect award 2022 runs until September 23, 2022. Vote here: www.inspect-award.com
The nominees of the category Vision
Automation Technology has developed a sensor chip with Widely Advance Rapid Profiling (WARP) technology for its C6-3070 3D laser scanner, which has a profiling speed of 38 kHz with an image area of 3,072 x 201 pixels and with a resolution of 3,072 points per profile. (Image: Automation Technology)
Baumer's freely programmable AX smart cameras combine robust industrial camera quality, Nvidia Jetson AI modules and Sony CMOS sensors to create a freely programmable image processing platform for vision-at-the-edge and AI applications. (Image: Baumer)
The Computar-Lensconnect technology from CBC (Europe) enables precise remote control of - depending on the lens model - zoom, focus and iris. (Image: CBC Europe)
Die Allpixa-Evo-Zeilenkamera-Familie von Chromasens verfügt über CMOS-Sensoren in Mono und Farbe mit Sensorlängen von 8, 10 oder 15 k und einer Dual-10-GigE-Schnittstelle. (Bild: Chromasens)
Edmund Optics' athermal imaging lenses offer MTF performance of >20 percent contrast up to a resolution of 200 lp/mm, corresponding to 2.5 µm pixels. (Image: Edmund Optics)
Lucid's Triton Edge smart camera leverages AMD Xilinx's Zynq UltraScale+ technology with multiprocessor functionality and user-programmable FPGA accessibility. (Image: Lucid Vision Labs)
With the MV-Blue Naos4 series, Matrix Vision complements its embedded vision portfolio with models designed for the Sony Pregius S series sensors. (Image: Matrix Vision)
The Scarlet 3D stereo camera from Nerian Vision combines a 3D camera and image processing system in one device. (Image: Nerian)
The SHR661 is a high-resolution industrial camera from SVS-Vistek with 127.6 megapixels and M72 mount. (Image: SVS-Vistek)
Vision Components introduces the VC Power SOM FPGA-based hardware accelerator that enables complex image pre-processing, can be easily integrated into designs and offers more flexibility in processor board selection. (Image: Vision Components)
The nominees of the category Automation + Control
Aerotech's Automation1 control platform combines control of positioning systems and their components on a single platform. (Image: Aerotech)
The THT Line 3D from Göpel Electronic is an inspection system for double-sided, parallel inspection of electronic assemblies with SMD and THT components. (Image: Göpel Electronic)
The Surfacecontrol 3D 3500 3D snapshot sensor offers high repeatability in z to 0.4 µm and delivers complete 3D images from 0.2 s. (Image: Micro-Epsilon)
Octum has developed the Vial.Inspect series of inspection systems to check injection vials for proper condition before filling. (Image: Octum)
Opto's Profile M inverted microscope is purely digital and designed for microfluidic tasks as well as automation of biomedical evaluations. (Image: Opto)
Tordivel's Scorpion 3D Multispectral Food Grader automatically measures the absolute color from 400 to 1,000 nm of food on a moving conveyor belt. (Image: Tordivel)
Visiconsult's ECO R. X-ray inspection cabin is equipped inside with a robot that uses a C-arm to hold an X-ray source on one side and a detector on the other. (Image: Visiconsult)
The Phoenix Speed Scan HD from Waygate Technologies is a fully automated micro computed tomography (CT) system for industrial inspection, for example of batteries, electronic or injection molded parts. (Image: Waygate)
The combination of two sensors to form the Werth Chromatic Focus Zoom (CFZ) multisensor reduces costs and simplifies the operation of the measuring instrument. (Image: Werth Messtechnik)
The Comet Yxlon UX50 is a robust, 450 kV CT system for inspecting large and dense components in the production environment. (Image: Comet Yxlon)
Vote here for the inspect award 2022: www.inspect-award.com
most read
Weld Seam Inspection Through Optical Coherence Tomography
A stand-alone OCT-based sensor system enables precise, continuous seam inspection in GMA welding, reducing the effort required for downstream quality checks.
Gas Phase Plasma Transfer in Analysis of Metal Microparticles
Laser-induced breakdown spectroscopy enables the analysis of the thermochemical oxidation of iron particles by measuring the oxygen-to-iron ratio. But laser pulse length affects the surrounding gas phase.
“New technologies always start in R&D”
Kolja Haberland, CTO at Laytec, talks about the early years of the company and explains how they managed to grow from a three-person operation to a globally active medium-sized enterprise.
Chatbots for Dead, Endangered, and Extinct Languages
Possibilities and Limitations of Generative AI for Continuing Education.
A Usable Workflow in Optical Metrology
The Handyscan 3D Evo Series puts traceable optics and software within reach of the process, helping organizations move from data collection to confident decisions with fewer interruptions.