Li-Fi GigaDock installed on the ISS space station
To ensure a problem-free interface between satellite components, Fraunhofer IPMS has developed a transceiver that was integrated into the iBoss GmbH interface and is on board the ISS for testing since February 2022.
There is international consensus in the space industry regarding the modularity of future satellite systems. In the future, such systems should be able to be flexibly disassembled and reassembled as in a modular system. The advantage of modular plug-and-play systems is that defective components can be replaced, thus significantly increasing the service life and function of a satellite. At the end of their lifetime, satellites either burn up in the earth's atmosphere or remain in earth orbit. As a consequence, space debris is produced, which already generates enormous costs and effort and can become a real danger to life in manned space flight. The new generation of satellites will therefore replace the traditional architecture with a more sustainable and modular concept.
In order to be able to flexibly attach and detach modules directly in space, easy-to-couple and standardized components are particularly important. In addition to the mechanical coupling of the individual modules, it is essentially a matter of ensuring the transfer of data and energy between the individual modules so that satellites can be combined as required. For this reason, RWTH Aachen University applied for a patent years ago, which has now been brought to market by the spin-off iBoss GmbH as iSSI – intelligent Space System Interface – and forms a standard interface for such systems.
Fraunhofer IPMS technology in space
Part of the interface is a development of the Fraunhofer Institute for Photonic Microsystems IPMS in Dresden, Germany, known as Li-Fi GigaDock. The core of the technology is an optical wireless transceiver, a highly integrated device that enables contactless full-duplex and bidirectional data transmission with a data rate of up to 5 Gbps. The possible transmission distance of the optical data interface is five centimeters. The component can also be used for rotor-to-stator transmission, as the transceiver functions perfectly even at high speeds.
“Building on this component, Fraunhofer IPMS has developed a communication module for iBoss that has now made it into space, or to be more precise, even onto the ISS,” says a delighted Alexander Noack, head of development for optical wireless communication. “In addition to space travel, the component can be found in industrial communication systems, in medical technology as well as in docking applications,” he continues.
In February, the interface flew into space for testing and demonstration purposes and was mounted by a robot for the first time on the Japanese part of the ISS. The module is to remain there until mid-December and prove its operational capability under vacuum conditions and the influence of radiation.
Company
Fraunhofer Institut für Photonische Mikrosysteme IPMSMaria-Reiche-Str. 2
01109 Dresden
Germany
most read
The winners of the inspect award 2025
This time, with two additional categories, “SMEs” and “Artificial Intelligence,” the selection was even larger than usual. But now they have been chosen: the machine vision products of the year 2025.
Infineon and Marelli enter new era of cockpit design
MEMS laser beam scanning for an immersive car display experience.
Machine vision subsidiary Realsense splits from Intel
Realsense, a company specializing in AI-based machine vision, is being spun off from Intel Corporation. At the same time, it has completed another round of financing.
B&R products now available in Europe through RS
B&R has entered into a strategic partnership with RS to distribute B&R products through RS's online and offline channels.
A New Era of Smart Manufacturing Begins
The inaugural SPS – Smart Production Solutions Atlanta starts soon, marking a significant milestone in the evolution of the SPS brand.