New lighting control
At the request of some customers, Falcon has developed a compact and simple controller.
-
With a switch-on delay of less than 2us, the LIC-TRG1 enables fast switching. Bild: Falcon
With a power supply of 12-48V, this can control lighting in continuous operation as well as in trigger and strobe mode . In flash mode (strobe), taking into account the duty cycles of 10% and a switching frequency <100Hz, currents of up to 6A can be achieved. The maximum flash duration of 10ms is limited by the controller in strobe mode .
In trigger mode , this can be as long as you like. The controller has a four-pin M8 connector at the input and output. Due to the optocoupler installed at the input, there is also a galvanic isolation. It is triggered in TTL mode with a voltage between 3.3-5V. With a switch-on delay of less than 2us, the LIC-TRG1 enables fast switching.
Contact
Falcon Illumination MV GmbH & Co. KG
In den Scheibigswiesen 8
74257 Untereisesheim
Germany
+49 7132 991 69 0
+49 7132 991 69 10
