News

Closing the terahertz gap

10.02.2023 - A new thin-film circuit produces finely tailorable terahertz-frequency waves.

Researchers led by Cristina Benea-Chelmus in the Labora­tory of Hybrid Photonics (HYLAB) in EPFL’s School of Engineering have taken a big step toward successfully exploiting the terahertz gap, which lies between about 0.3 to 30 THz on the electro­magnetic spectrum. This range is currently something of a techno­logical dead zone, describing frequencies that are too fast for today’s electronics and tele­communications devices, but too slow for optics and imaging appli­cations. Now, thanks to an extremely thin chip with an integrated photonic circuit made of lithium niobate, the HYLAB researchers and colleagues at ETH Zurich and Harvard University have succeeded not just in producing terahertz waves, but in engi­neering a solution for custom-tailoring their frequency, wavelength, amplitude, and phase.

Such precise control over terahertz radiation means that it can now potentially be harnessed for next-generation applications in both the electronic and optical realms. “Seeing the devices emit radiation with properties that we predefined was a confir­mation that our model was correct,“ says Alexa Herter, currently a PhD student at ETH Zurich. “This was made possible due to the unique features of lithium niobate inte­grated photonics,” adds Amirhassan Shams-Ansari, a post­doctoral fellow at Harvard University.

Benea-Chelmus explains that while such terahertz waves have been produced in a lab setting before, previous approaches have relied primarily on bulk crystals to generate the right frequencies. Her lab’s use of the lithium niobate circuit, finely etched at the nanometer scale by colla­borators at Harvard University, makes their novel approach much more stream­lined. The use of a silicon substrate also makes the device suitable for integration into electronic and optical systems. “Generating waves at very high fre­quencies is extremely challenging, and there are very few techniques that can generate them with unique patterns. We are now able to engineer the exact temporal shape of terahertz waves – to say essen­tially, ‘I want a waveform that looks like this,’” she explains.

To achieve this, Benea-Chelmus’ lab designed the chip’s arrangement of waveguides, from which microscopic antennas broadcast terahertz waves generated by light from optical fibers. “The fact that our device already makes use of a standard optical signal is really an advantage, because it means that these new chips can be used with traditional lasers, which work very well and are very well understood. It means our device is telecommuni­cations-compatible,” Benea-Chelmus emphasizes. She adds that minia­turized devices that send and receive signals in the terahertz range could play a key role in sixth generation mobile systems (6G).

In the world of optics, Benea-Chelmus sees particular potential for miniaturized lithium niobate chips in spectro­scopy and imaging. In addition to being non-ionizing, terahertz waves are much lower-energy than many other types of waves currently used to provide information about the composition of a material – whether it’s a bone or an oil painting. A compact, non-destructive device like the lithium niobate chip could therefore provide a less invasive alternative to current spectro­graphic techniques. “You could imagine sending terahertz radiation through a material you are interested in and analyzing it to measure the response of the material, depending on its molecular structure. All this from a device smaller than a match head.”

Next, Benea-Chelmus plans to focus on tweaking the properties of the chip’s waveguides and antennas to engineer waveforms with greater amplitudes, and more finely tuned frequencies and decay rates. She also sees potential for the terahertz techno­logy developed in her lab to be useful for quantum appli­cations. “There are many fundamental questions to address; for example, we are interested in whether we can use such chips to generate new types of quantum radiation that can be mani­pulated on extremely short timescales. Such waves in quantum science can be used to control quantum objects.” (Source: EPFL)

Reference: A. Herter et al.: Terahertz waveform synthesis in integrated thin-film lithium niobate platform, Nat. Commun. 14, 11 (2023); DOI: 10.1038/s41467-022-35517-6

Link: Hybrid Photonics Laboratory, EPF Lausanne, Lausanne, Switzerland

Digital tools or software can ease your life as a photonics professional by either helping you with your system design or during the manufacturing process or when purchasing components. Check out our compilation:

Proceed to our dossier

inspect award 2024

The voting for the inspect award 2024 is open.

Vote now!

Digital tools or software can ease your life as a photonics professional by either helping you with your system design or during the manufacturing process or when purchasing components. Check out our compilation:

Proceed to our dossier

inspect award 2024

The voting for the inspect award 2024 is open.

Vote now!