Optik / Photonik

Carl Zeiss GOM Metrology GmbH

Empty image

Products from this company
Vision

Platform for industrial metrology solutions

Carl Zeiss GOM Metrology GmbH -

29.09.2022 – In the long term, all software products from quality assurance and measurement technology are to be integrated into the suite.
Automation

GOM Combines Its Measurement and Evaluation Software in One Platform

Carl Zeiss GOM Metrology GmbH - Professional evaluation is what turns precise measurement results into a competitive advantage. 3D metrology specialist GOM has become the gold standard in many sectors with its...

News from this company
News

GOM becomes Carl Zeiss GOM Metrology

07.03.2022 -

GOM GmbH has been operating under the name Carl Zeiss GOM Metrology GmbH since the end of February. This is intended to clarify the unity almost three years after the...
Machine Vision

3D Metrology in Special Bicycle Workshop

26.07.2021 -

The Dutch company Van Raam, based in Varsseveld, produces special bicycles that enable people with limited mobility to enjoy independent mobility. It manufactures its...
Machine Vision

inspect award 2022: The nominees have been selected

17.06.2021 -

The jury of the inspect award 2022 has nominated ten products in the categories "Vision" and "Automation + Control" and the voting runs from now until September 24, 2021...
Machine Vision

Visualization and Analysis of CT Data

07.12.2020 -

Philipp Dobberkau speaks about the Visulisation and Analysis of CT Data.

WIN>DAYS 2020: Wiley Industry Days as a virtual industry event for machine vision, automation and security

23.10.2020 - The trade journals inspect, messtec drives Automation and GIT SICHERHEIT are organizing the virtual "Wiley Industry Days", or WIN>DAYS for short, with around 30 well-known...

GOM starts a new webinar series for 3D testing solutions

22.10.2020 - Enter the next level of measurement technology for motion and strain analysis. Learn more about the fundamental principles of digital image correlation and become an innovator in...

GOM Presents New 3D Measuring Systems at Online Event

04.05.2020 - Every Tuesday in May 2020, the measuring equipment manufacturer GOM will present a new measuring device or software during the online event Digital Days. The event starts on May 5...

Machine Vision

Truculent Tool

17.04.2020 - The digitization and measurement of failed mold inserts and sliders for plastics processing was used to rework imprecise system spare parts. 3D scanners using the triple scan...

The winners of the inspect award 2020

19.11.2019 - The field of applicants was strong, so there was little room between the nominees. But ultimately the readers of the inspect made a choice and each chose a winner from the...

News

Zeiss acquires GOM

20.05.2019 -

Zeiss has acquired GOM, a provider of hardware and software for automated 3D coordinate metrology, the industrial metrology and quality assurance portfolio of its...

Automation

Automated Quality Control at Opel

26.08.2016 - In future, Opel press shops will be relying on a new, automated 3D coordinate measuring machine for large parts. Sheet metal parts for all new Opel models will be inspected during...

Facebook Twitter LinkedIn Xing WhatsApp

Contact

Carl Zeiss GOM Metrology GmbH

Schmitzstraße 2
38122 Braunschweig
Germany

0531/39029-0
0531/39029-15

Email Website

Media Kit

The media kits for 2024 can be downloaded here.

Digital tools or software can ease your life as a photonics professional by either helping you with your system design or during the manufacturing process or when purchasing components. Check out our compilation:

Proceed to our dossier

Media Kit

The media kits for 2024 can be downloaded here.

Digital tools or software can ease your life as a photonics professional by either helping you with your system design or during the manufacturing process or when purchasing components. Check out our compilation:

Proceed to our dossier